Last night I decided to make tinder pouch for the fun of it. It is really easy to do. The whole process took me a about an hour to finish. Here’s how you do it.
First of all you need the following:
Material:
– A piece of hide. I used suede but any kind will do. I would probably recommend leather but you can actually use any material if you want to (plastic will give you a waterproof pouch).
– A string of some kind. Could be leather, paracord, or twine as I used in this example.
Tools:
– A pencil, pen or something to mark the hide with.
– Something round to use as a template. Preferably about 40 cm in diameter. I used a wok lid.
– A folding rule or measuring tape of som kind.
– A small screwdriver or Multi-tool with a reamer, screwdriver or the like.
– A pair of scissors or a sharp knife.
Process:
– First you place the hide on a flat surface.
– Then place your round template over it and draw a line along it. Preferably it should be about 40 cm in diameter. (If you want to extend the diameter of your template, simple add the amount of cm all the way around it that you want to add and mark it with your pencil).
– Using the scissors you cut out the hide along your marks. This will give you a perfectly round shape of hide.
– Next you have to decide how far from the edge you want you string to be. I measured 4 cm from the edge as I like to have a little bit more hide in the top when you close your pouch. I’ve seen other people recommend about 2,5 cm (1 inch).
– Now you mark where you want your holes to be all around the edge. The way I did this was to simply fold the hide down the middle and make a mark in the fold 4 cm from the edge. Then I did the same in the diagonal direction. And after that I folded the hide half way between the four marks I already had. If you did this correctly you will have 8 holes marked.
– Next you mark where the rest of the holes go. The way you do this is by measuring the distance between the marks you already have. Then divide it into something close to 2,5 cm, but no less than that. In my case the distance was 12 cm, so I made 3 marks with 3 cm between them. That left me with 32 holes.
– Now all you have to do is puncture your marks with your screwdriver (I pre-drilled mine with a point knife to avoid using to much force and accidentally destroying the hide).
Make sure your holes a big enough to allow your string to slide easily.
– Put the string in the holes and tie the ends together.
That’s it.
You can just tie the extend twine around your pouch or use it to fasten it to your belt. You could also make a cord lock if your prefer that.